SKU: N/AThis site contains affiliate links for which we may be compensated
Computers/Tablets & Networking / Computer Components & Parts / Computer Cases & Accessories / Computer Cases
NAS ATX Case - 8 HHD - 8 SSD - 3D Printed with 8" LCD Removed from a server farm, used in a special project. !!! Only the CASE and LCD are included. !!! Ships disassembled but includes all the case screws and standoffs. A molex to barrel power cable is included for the LCD. The power button, power LED and HDD LED are included. The power button may be a random color. This unit does NOT include the second hole for a reset button. Does not include screws to mount the motherboard, AOC, HDD or SSDs. All pieces were printed using PLA, the overall strength of the panels is fairly firm. A 1U power supply can be used and has mounting holes on the rear panel. HDD screw holes are located on the bottom of the unit. There is a slotted bar inside the case to align the HDDs. The SSD cage can be mounted either on the bottom or top. The bottom panel has eyelets for cable management. A removeable access panel for 3 80mm fans is on the back panel to access HDD/SSD cables. Side panels have mounting holes for 80mm or 120mm fans depending on the motherboard used. Approximately 150mm of height is available for a CPU fan (in the sample picture the fan is 130mm tall). 7 AOC card slots are open. Back panel includes a cutout for routing a VGA/HDMI cable to the LCD display. Unit includes an 8" LCD mounted on the front panel. Inputs include HDMI & VGA. Screen controls are mounted on the back of the front panel to adjust brightness/contrast/etc. Notes:
Please do not over tighten the screws only hand tight is recommended.
The LCD input will accept high resolutions and down scale them.
SuperMicro PWS-351-H 1U power supply was installed in the unit.
SuperMicro X9SRi-F Xeon motherboard was installed in the unit.
Adaptec 71605 was installed in the unit.
There are several access routes on the side of the motherboard to allow cables to reach the bottom level HDD/SDD.
The HDD fans were positioned to force air over the drives and out the front.
The rear HDD panel does make accessing HDD/SDD cable easier.
There are 6 feet mounted on the bottom to support the weight of a fully loaded case.
Does not include any of the above-mentioned server components.